| Availability: | |
|---|---|
| Quantity: | |
| PDF Export | |
K050-5 Series
SiRON
9031809090
About selection

Selection example: K050-5 indicates the K050series, serial number 5, with NPN output.
K050-5P indicates the K050series, serial number 5, with PNP output
Specifications
Name | Long range color scale sensor | |
| Model | K050-5 | K050-5P |
Output mode | NPN | PNP |
Appearance | ![]() ![]() | |
Deaction distance | 50~500 mm | |
Minimum spot diameler | Approximately Φ3.5mm (at a distance of 100mm); approximately φ9mm (at a distance of 250mm); approximately Φ20mm (at a distance of 500mm) | |
Response time | 200μs/1ms/10ms/100ms/500ms | |
Iluminant | White L E D | |
Reduce mutual interference function | Set different frequencies, maximum 2 units | |
Supply voltage | 10 - 30V DC including ripple (P - P) 10% | |
Current oonsumption | 50 mA or less (when the power supply voltage is 24 V), 100 mA or less (when the power supply voltage is 12 V) | |
Class oflaser | Class2 or LPS | |
Timer | OFF/On Delay/Off Delay/Single Shot | |
Control output | NPN open collector / PNP open collector switchable, below 30V, below 100mA, residual voltage below 2V, N.O. / N.C. switchable | |
External input | Tunable/Stop transmission switchable | |
Protection circuit | Power reverse connection protection, power surge protection, output overcurrent protection, output surge protection | |
Ambientilumination | Incandescent lamp: ≤10,000lux, sunlight: ≤20,000lux | |
Ambient temperature | -20~+50℃(No freezing) | |
Relative humidity | 35~85%RH(No condensation) | |
Impact resistance | 1000m/S⊃2;, 6 times in each of the X/Y/Z directions | |
Vibration resistance | 10~55Hz, double amplitude 1.5mm, 2 hours each in X/Y/Z directions | |
Classof protection | IP65 | |
| Line length | 2m | |
| Material | Shell: zinc casting (chrome-plated); Indicator light cover: PC; Button: stainless steel | |
| Weight | 128g | |