| Availability: | |
|---|---|
| Quantity: | |
| PDF Export | |
K002-3 Series
SiRON
9031900090
About selection

Selection example: K002-3 indicates the K002 series, with 3 serial numbers and NPN output.
K002-3P indicates the K002 series,3 serial numbers,PNP output.
Fiber optic amplifiers need to be used with fiber optic components
|
|
|
|
K002-1 Chinese display fiber optic amplifier | K002-2 Universal dual digital fiber optic amplifier | K002-3 High speed dual digital fiber amplifier | K002-4 Dual digital fiber amplifier(Enhanced) |
|
|
|
|
|
Specifications
Name | High-speed dual-digital optical fiber amplifier | |
Model | K002-3 | K002-3P |
Appearance | ![]() | |
Supply voltage | DC12~24V+10% | |
Current consumption | ≤40mA | |
Light source | 4-element red light-emitting diode 630nm | |
| Detection distance | Reflection :300mm,opposite reflection:1500mm | |
Response time | P0:<50us;P1:<200μs;P2:<400μs;P3:<8004s;P4:<4ms | |
Frequency of response | 10KHz | |
Delay function | No delay/Single delay/high delay/low delay | |
Output mode | The collector of NPN is open-circuited | The collector of PNP is open-circuited |
Maximum input current | 100mA | |
Maximum residual voltage | <1V | <2V |
| Switch mode | Light-on(Light entry action)/dark-on (light blocking action)can be switched | |
Display | Threshold setting value:4-digit green LED Current collected value:4-bit red LED | |
Ambient ilumination | Incandescent lamp 3000Lux;Sunlight 10,000 lux | |
Ambient temperature | Operating temperature:-10℃ to 55℃ Storage :-25℃to 70℃,no freezing | |
Ambient humidity | During operation:35%-85%RH Storage :35%-95%Rh,no condensation | |
Protection circuits | Polarity reverse connection protection/surge protection/short circuit protection | |
| Degree of protection | IP64 | |
Connection | Lead-out type(3 cores standard wire length 2 meters) | |
Housing material | ABS | |
Vibration resistant | 10-55Hz,dual amplitude 1.0mm,30 minutes each in the XY/Z directions | |
| Impact-resistant | 300m/S2,3 times each in the XN/Z directions | |